Fiber Optic Cable Blowing Machine

Kösmak machine is making fiber optic cable blowing machine designes with the users of fiber optic cable blowing machine. The users are the better guys to take idea while you are making fiber optic cable blowing machine. The little ideas comes which from this guys makes the design of fiber optic cable blowing machine better than others.

Air is very importand on fiber optic cable blowing work because air is decreasing and increasing friction between duct and fiber optic cable.If the friction is too much between duct and fiber optic cable you can not make fiber optic cable blowing so what happens while blowing fiber optic cable in duct , fiber optic cable damages or breaks in duct. You need to have a compressor to use on fiber optic cable blowing.

There are lot’s of different types and models of compressors so how you can choose a compressor.You need to have a compressor which gives most suitable air for your duct. Duct diameter is importand on choosing compressor because you are giving compressed air in duct while blowing fiber optic cable.

There are two points on the air flow one of them is bar and the other one is air pressure. The bar of the air must be 12 bar at all condutions but the air flow can change as your duct diameters.If the duct diameter is getting bigger you need more air flow to blow fiber optic cable. If the duct diameter is smaller you need less air flow to blow fiber optic cable in duct.

For example if you blow fiber optic cable in 40 mm duct diameter you need 10 -12 meter cup/minute air flow at 12 bar. If you blow fiber optic cable in 14 mm duct you need 1,5-3 meter cup/minute air flow. Because of this filling air you can blow fiber optic cable to th duct which’s diameter is maximum 50mm. if the duct is bigger than 50 mm you can not blow fiber optic cable in duct because can not fill the duct. If you want to fill it you need very big compressor and it will be very expensive.