How Is Fiber Optic Cable Applied?

Fiber optic cable is blowing with fiber optic cable blowing machines in duct between 2 menholes. The distance between two menhole can be different. Area condutions.are determining factor on this duct laying and menhole montaging job.

For example if you montage ducts in city you can make the distance between two menholes 30-50 -80 100 meter because you need to blow fiber optic cable inside it so the duct must be layed directly so the dimension between menholes lesss.

If you montage duct between cities so you have big clearence areas so you can make the distance between menholes 500 meter -1 km-1.5 km or 2 km . Mostly the mehole are montaging as 500 meter distances between each other. 500 meter is good for fiber optic cable blowers. If the area is okey to blow more han 500 meter. Fiber blowers can montage duct each other in mehole and can blow 1 km or can blow 1.5 km at once.

Land conditions are importand for fiber optic cable blowing for example if you are blowing fiber optic cable to the up of the hill it is hard to blow but if you blow down the hill it will be easier than blowing upside. Some user’s say that they can blow fiber optic cable more than 4 km at once from up to down. Also blowing little diameter fiber optic cable is easier than blowing bigger fiber optic cable because bigger oner are heavier than small fiber optic cables. There is much many importand thing also on cable blowing the duct diameter and fiber optic cable diameters are suitable to each other or not.

Little fiber optic cable’s needs little fiber optic cable blowing machines, bigger fiber optic cable’s needs bigger fiber optic cable blowing machines because bigger fiber optic cables needs more pushing force and more air flow.If you do not give this items you can not blow fiber optic cable.